With our latest product you can easily roll crimp your own sabot slugs with this shell station. No major equipment or set up needed. Click on the picture for more information and view our simple instructional video.

Made in the USA

This is a durable, long-use nylon 12 gauge roll crimping head tool. Use with any 3/8" drill capable of low speeds, 200-400 rpm. Instructions are included.

Here are two great important facts:

There is no need for lubricant on the hull when you use our roll crimp tool at the lower speed range.

Our roll crimp tool will not build up heat like a steel roll crimp tool does.

Made in the USA

20 pieces/pack

For Rifled Barrel Shotguns Only

.727 caliber solid wall sabot with double chevrons
1 1/8 oz. pure lead Hammerhead slug 

Key Benefits

• SPW discards on impact and the result is up to 1-1/4" (in 12ga) or better expansion PLUS 100% weight retention.
• Splined holding compartment allows for maximum rotational spin from rifling to the slug - no slipping
• Total Ejection Weight = 1¼ oz. for higher bullet coefficient creating a flatter down range trajectory
• Double Chevron for lower recoil curve
• Aerodynamic Vortex for added in flight stability and adding back drag
• Pure lead Hammerhead slug for optimum penetration, expansion - no fracturing
• Specialized polymer material to withstand temperatures well below 0°C

  ---

   Load Data

For Rifled Barrel Shotguns Only

.727 caliber solid wall sabot with double chevrons

weight: 70 grains

Can be loaded with most .50 cal bullets or make your own

Key Benefits

• SPW discards on impact
• Splined holding compartment allows for maximum rotational spin from rifling to the slug - no slipping
• Double Chevron for lower recoil curve
• Aerodynamic Vortex for added in flight stability and adding back drag
• Specialized polymer material to withstand temperatures well below 0°C 

** Cost Saving Note**

With our unitized SPW, there are no sabots to fly off and destroy your chronograph.

Order as many as you need by the single unit piece.  Example: Need 32? Add 32 to the cart.

** SOLD OUT **

20 pieces/pack

For Rifled Barrels Only

Load Data

 20 gauge Sabot Pressure Wad with 15/16 oz. pure lead Hammerhead slug

For Rifled Barrel Shotguns Only

.615 solid wall sabot with double chevrons

weight: 60 grains

Can be loaded with most .44 cal bullets or make your own

Key Benefits

• SPW discards on impact
• Splined holding compartment allows for maximum rotational spin from rifling to the slug - no slipping
• Double Chevron for lower recoil curve
• Aerodynamic Vortex for added in flight stability and adding back drag
• Specialized polymer material to withstand temperatures well below 0°C 

** Cost Saving Note**

With our unitized SPW, there are no sabots to fly off and destroy your chronograph.

Order as many as you need by the single unit piece.  Example: Need 32? Add 32 to the cart.

Cheddite 12ga 2 3/4", High Brass 209 Primed Shotgun Hulls.

Don't forget to order these when you order your SPWs!

This item will only be shipped via UPS, due to regulations. Please make the correct shipping selection at checkout: UPS.

Cheddite 12ga 209 Primed 3" Shotgun Hulls High Brass

Don't forget to add these when you order your SPWs!

This item will only be shipped via UPS, due to regulations. Please make the correct shipping selection at checkout.

Cheddite 20ga 2.75" 209 primed 16mm High brass Shotgun hulls, new

This item will only be shipped via UPS, due to regulations. Please make the correct shipping selection at checkout.

Cheddite 20ga 209 Primed 3" Shotgun Hulls, high brass, new

Don't forget to add these when you order your SPWs!

This item will only be shipped via UPS, due to regulations. Please make the correct shipping selection at checkout.

Cheddite 20ga 3 1/2", High Brass 209 Primed Shotgun Hulls.

This is brand new, surplus from the Hastings brand of ammo. Hulls measure 3.39" tall.

 This item will only be shipped via UPS, due to regulations. Please make the correct shipping selection at checkout: UPS.